LED lights with application installation
LED lights with Scope
LED lights, LED light bar has been widely used in furniture, automotive, advertising, lighting, ships, bars and other industries.
LED lights with installation methods
① four-wire light-bandwidth of about 22mm, a thickness of about 8mm, weight about 0.25kg / m (4 mi a Kg)
② four-wire lights with a total of four wire, three rows of lights (note not four rows of lights Oh ~ ~), each row of one meter 24 lights, 24 * 3 = 72. Because each lamp beads power is 0.05W, the power lights with 72 beads is: 72 * 0.05 = 3.6W.
③ per meter of "scissors" mark, only the tag was cut, scissors or shears partial dislocation will cause a meter does not shine! Some will be missed because when marking some of the best look carefully before cutting mark position, according to local intermediate cut can not connect. A closer look will be able to see that.
④ Each light must be equipped with a special plug (a plug with a transformer); when the connection be sure to remove the clear plastic cover, and then take a good test lamp cover. It must not be connected directly to a covered, so easy to short circuit!
⑤ lights when installed, usually placed lamp slot, put straight on it, you can use a string or thin wire fixed. For exterior or vertical installation, additional Gouka child and tail plug. The original clip is completely transparent, preferably glass, plastic waterproof after installation marked the end of the plug and the plug in place, better waterproof performance so something.
Dedicated quick connector free solder used for home personal installation may be provided, without iron and other special tools, use the following
Not waterproof soft light bar illustrate the use of quick connectors
A1: soft light bar connected to the power supply connector.
A2: open a lock at the side of the product, fold up the lid to open.
A3: After folding cover open, the end of the flexible light strip is inserted into the connector, then turn back to lock the lid off.
A4: complete the connection.
Installation Guide
1, indoor installation: LED lights for indoor decoration, because do not have to withstand wind and rain, so installation is very simple. In light rainbow electronic production of LED lights, for example, behind each LED lights are affixed with self-adhesive 3M double-sided adhesive, you can tear the sticker 3M double-sided adhesive surface when installed, and then the lights fixed in need installation place by hand flat enough. As some corner where it is needed or how long do? Very simple, LED lights with 3 LED circuit configuration is for a group of series and parallel composition, ie every three LED can be cut separately.
2, outdoor installation: will withstand outdoor installation due to the wind and rain, if 3M adhesive fixed, then, a long time will result in a decrease in the adhesion 3M LED lights off, and therefore often used for outdoor installation slot fixed way. Cut and connect local needs, methods, and indoor installations, the only need additionally equipped with waterproof plastic, waterproof effect to consolidate connection points.
3, the power connection method: LED lights with general voltage DC 12V, so need to use switching power supply, the size of the power supply according to the power and the connection length LED lights to be. If you do not want each LED lights are used to control a power supply, you can buy a relatively large power switching power supply make the mains, then all the LED lights all in parallel with the input power (wire size is not enough, then you can additionally extended), unified by the total switching power supply. Such benefits can be centrally controlled, convenient place is the lighting effect and switching control can not be achieved with a single LED lights, specifically in what way can use to measure by themselves.
4, the controller connection: LED ticker tape and all lights with RGB controller is required to achieve the changing effects, while controlling the distance between each controller is not the same, in general, a simple controller to control the distance from 10 to 15 m, from the remote controller to control 15 to 20 meters, the longest can control up to 30 meters away. If the LED lights with connection distance is longer, but the controller can not control so long lights, then you need to use the power amplifier to tap.
5, pay attention to LED lights with the connection distance: In general, 3528 series of LED lights, its connection distances up to 20 meters, 5050 series of LED lights, maximum connection distance of 15 meters. If you exceed this connection distance, the LED lights are easy to heat, the use of the process will affect the life of LED lights. Therefore, the installation must be installed according to the manufacturer's requirements, should not allow LED lights with overload operation.
LED lights with Scope
LED lights, LED light bar has been widely used in furniture, automotive, advertising, lighting, ships, bars and other industries.
LED lights with installation methods
① four-wire light-bandwidth of about 22mm, a thickness of about 8mm, weight about 0.25kg / m (4 mi a Kg)
② four-wire lights with a total of four wire, three rows of lights (note not four rows of lights Oh ~ ~), each row of one meter 24 lights, 24 * 3 = 72. Because each lamp beads power is 0.05W, the power lights with 72 beads is: 72 * 0.05 = 3.6W.
③ per meter of "scissors" mark, only the tag was cut, scissors or shears partial dislocation will cause a meter does not shine! Some will be missed because when marking some of the best look carefully before cutting mark position, according to local intermediate cut can not connect. A closer look will be able to see that.
④ Each light must be equipped with a special plug (a plug with a transformer); when the connection be sure to remove the clear plastic cover, and then take a good test lamp cover. It must not be connected directly to a covered, so easy to short circuit!
⑤ lights when installed, usually placed lamp slot, put straight on it, you can use a string or thin wire fixed. For exterior or vertical installation, additional Gouka child and tail plug. The original clip is completely transparent, preferably glass, plastic waterproof after installation marked the end of the plug and the plug in place, better waterproof performance so something.
Dedicated quick connector free solder used for home personal installation may be provided, without iron and other special tools, use the following
Not waterproof soft light bar illustrate the use of quick connectors
A1: soft light bar connected to the power supply connector.
A2: open a lock at the side of the product, fold up the lid to open.
A3: After folding cover open, the end of the flexible light strip is inserted into the connector, then turn back to lock the lid off.
A4: complete the connection.
Installation Guide
1, indoor installation: LED lights for indoor decoration, because do not have to withstand wind and rain, so installation is very simple. In light rainbow electronic production of LED lights, for example, behind each LED lights are affixed with self-adhesive 3M double-sided adhesive, you can tear the sticker 3M double-sided adhesive surface when installed, and then the lights fixed in need installation place by hand flat enough. As some corner where it is needed or how long do? Very simple, LED lights with 3 LED circuit configuration is for a group of series and parallel composition, ie every three LED can be cut separately.
2, outdoor installation: will withstand outdoor installation due to the wind and rain, if 3M adhesive fixed, then, a long time will result in a decrease in the adhesion 3M LED lights off, and therefore often used for outdoor installation slot fixed way. Cut and connect local needs, methods, and indoor installations, the only need additionally equipped with waterproof plastic, waterproof effect to consolidate connection points.
3, the power connection method: LED lights with general voltage DC 12V, so need to use switching power supply, the size of the power supply according to the power and the connection length LED lights to be. If you do not want each LED lights are used to control a power supply, you can buy a relatively large power switching power supply make the mains, then all the LED lights all in parallel with the input power (wire size is not enough, then you can additionally extended), unified by the total switching power supply. Such benefits can be centrally controlled, convenient place is the lighting effect and switching control can not be achieved with a single LED lights, specifically in what way can use to measure by themselves.
4, the controller connection: LED ticker tape and all lights with RGB controller is required to achieve the changing effects, while controlling the distance between each controller is not the same, in general, a simple controller to control the distance from 10 to 15 m, from the remote controller to control 15 to 20 meters, the longest can control up to 30 meters away. If the LED lights with connection distance is longer, but the controller can not control so long lights, then you need to use the power amplifier to tap.
5, pay attention to LED lights with the connection distance: In general, 3528 series of LED lights, its connection distances up to 20 meters, 5050 series of LED lights, maximum connection distance of 15 meters. If you exceed this connection distance, the LED lights are easy to heat, the use of the process will affect the life of LED lights. Therefore, the installation must be installed according to the manufacturer's requirements, should not allow LED lights with overload operation.
This article comes from:http://www.realgreenled.com/LED-Strip-Light/
No comments:
Post a Comment